GTO/Linear Pro SW3000XLS Single Gate Opener (PROSW3000XLS)
Click on the image to enlarge!

GTO/Linear Pro SW3000XLS Single Gate Opener (PROSW3000XLS)

Sale Price: $725.00



GTO/ Linear Pro proudly presents the new upgraded Linear Pro SW 3000 XL series as the Linear Pro SW3000XLS. The Linear Pro SW3000XLS focused on upgrading the performance and durability of the unit. The biggest changes with this gate opener is the increase of the opening speed by 10%, a rev-counter board with a reed switch technology that helps the unit to determine its position, and a better front mount scraper seal design.

Linear Pro SW 3000XLS is a DIY kit and is easy to install. It is frequently installed in residential applications that want to automate gates made of farm tubing, steel, aluminum, wood, chain link and many other gate types. This unit can be installed on either side of your gate. In most applications, it is used as a pull to open unit, but you do have the option of a pull to open if needed by adding the push-to-open bracket (NOT INCLUDED) . If your installation involves a round post, you can use an angle iron to extend the rear face of the post to fit the mounting bracket.

The Linear Pro SW 3000XLS is a low voltage system, this will avoid the need of running 110 AC power to your gate. It's as simple as running a 16 gauge 2 conductor low voltage wire to your nearest power outlet supply within 1000’ away from the gate. Solar power accessories are also compatible with this unit (sold separately). We carry a complete line of accessories including key pads, transmitters, exit wands, gate locks, solar panels and much more to make your gate opener more convenient. This new gate opener is not cross compatible with the old PRO SW 3000XL model. The control board and arms can not be used or exchanged if you require a replacement part.


The GTO/PRO SW3000XLS is a practical system that is easy to install. It is the larger of the two heavier duty openers made by GTO, Inc.

  • Gate Length and Weight - Up to 20ft length and 1000 lbs
  • Gate Materials - Wood, Steel, Aluminum, Vinyl, Chain Link, and more
  • Gate Post or Column Size (pull to open design) - Max 24"x 24" post or gate mounted 12" from the rear face of a column (the gate side facing the property)
  • Push to Open - Yes (longer bracket may be needed in some situations and can be purchased separately); setback does not apply to push to open
  • Power - Battery (included) and Low Voltage Trickle Charge (included; 12V DC/7.0 A system)
  • Solar Compatible - Yes
GTO/ACCESS SYSTEMS 3000XLS Gate Capacity Chart.

  • Soft Start/Soft Stop - Soft start/soft stop is a feature in which the control board, during the set up process, learns where your opening and closing points are for the swing of the gate. Then during normal operation the gate operator automatically slows the motion of the gate to smoothly meet with the gates destination point. This feature can also be turned off.
  • Closing Timer - Set your gate to close between 0 and 100 seconds after reaching the full open position or turn this option off to leave it open until an entry device activates closing motion.
  • Learn Mode - With the GTO/PRO 3000XLS the learning process, the end points are determined by the user via remote. A simple press of the transmitter tells the opener where to stop and when the opener is set to the desired stop points, save the settings on the board.
  • Control Box Housing - The GTO/PRO 3000XLS control box can house a 7 amp/hour battery and is rated for outdoor use. It is resistant to high winds, sand, dust, rain, snow, sleet, and freezing water, protecting your valuable control board from the elements and your battery from corrosion.


The tools and supplies listed below are suggested in the manufacturers manual. DiYGaterOpeners does not provide these tools and supplies, but they are available at local hardware stores for purchase or rental.

  • Power Drill
  • Open End Wrenches - 3/8", 7/16", and 9/16"
  • 3/8" Drill Bit
  • Hacksaw or Heavy Duty Bolt Cutters
  • Small (Flat Bladed) Screwdriver
  • Phillips Screwdriver
  • Tape Measure
  • Level
  • Wire Strippers
  • C-Clamps - small, medium, and large
  • Center Punch
  • An extra person will be helpful

Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.

  • Rev-counter board with reed switch technology
  • Improved front mount and scraper seal design
  • 12 Volt DC/7.0 amp hour, sealed, rechargeable battery
  • One button auto-memorization of digital transmitter code
  • Mounting Hardware for a post mounted installation
  • AC Transformer
  • Operator Arm
  • 318 MHz RF radio reciver
  • Entry transmitter
  • Control Box and Control Board
  • UL325 Certified
  • Spanish/English Manual


In addition to providing innovative and renowned products, has a unique website that allows customers to truly visualize their security aspirations. On the website, customers can utilize the virtual builder to create a representation of their home security gate system, complete with varying gate materials and designs. The customization doesn't stop there, however. ensures that all points of gate opener installation are taken into account by offering such considerations as distance to a power supply, distance from the house to the gate, the number of homes secured by the gate, etc. By allowing customers to consider these points, ensures that the realization of the design is not only effective but also possible; there will be no trial and error with fitting the proper gate opener to a customer's security needs. Furthermore, our Discount It Yourself packages allow customers to choose exactly what they need, not what someone else thinks they need. Every gate opener design is truly customized to the consumer's specifications.

The website design is all about putting the customer's needs first, and does not stop there. The difference of any gate opener or accessory that a customer finds on an authorized dealer's website for cheaper will be refunded, plus 10% of that difference. Similarly, if the 9am-9pm EST Tech Support Hours do not fit a customer's schedule, the customer need only send in an e-mail detailing expected installation time, and will respond with a number for the customer to reach a representative during the scheduled installation. How many other companies will alter their business hours for a customer? At, the customer does come first.

Manual: SW3000XLS Opener Manual