GTO / Linear Pro 1000 & GTO / PRO1002 Replacement

• Gate Materials: Light Wood, Light Steel, Aluminum, Vinyl, Chain Link, and others.
• Weight and length:Up to 16ft in length OR 500lbs
  
  
• Direct replacement for GTO / PRO 1000 & GTO / PRO 1002
• Max degree of opening: 110 degrees
• Gate Post or Column size (pull to open): Max 4" x 4" post or gate mounted 2" from the rear face of a column.
• Push to Open: Yes (bracket purchased separately) - setback above does not apply to push to open.
• Solar Compatible: Yes, browse our solar panels (purchased separately).
• Power: Battery (Included) and Low Voltage Trickle Charge (Included)
• Power Wire Specification: 16 gauge wire (purchased separately) with 1,000 foot max length from transformer to control board.
• Operating Temperature: -5 ºF to +160 ºF

GTO Gate Opener - GTO PROSW2000XLS Single Gate Opener

An exciting time in the world of gate openers. GTO/PRO has rereleased their PRO-SW2000XL series of gate openers as the PRO-SW2000XLS series. The XLS series has a number of improvements over its predecessor including a 10% increase in the operating speed. The XLS series also contains a new rev-counter board with reed switch technology, which helps the gate opener determine its position. In addition, the XLS series includes an improved front mount and scraper seal design. Unfortunately, the new XLS series control boards and arms are not cross compatable with the XL series. So, if you purchase an XLS arm for your XL control board, they will not work together.

The GTO/PRO 2000XLS Single Gate Opener can be used in residential applications including automating gates made of farm tubing, steel, aluminum, wood, and chain link, along with many other gate types. This opener can be set on the left or right and is used in the standard pull-to-open operation. By adding the push-to-open bracket (347IH) (not included) the GTO/PRO 2000XLS can be used to push the gate open away from the property with the arms still mounted on the inside.

The GTO/PRO 2000XLS Single Opener is a low voltage system, eliminating the need to run expensive 110 volt AC power wire to your gate. Simply run 16-gauge low voltage 2-conductor wire to a household outlet within 1000' of the operator or use a solar panel within 200' using the same wire. With the GTO/PRO 2000XLS's oversized control box you can house (2) 7 amp/hour batteries to accommodate higher opening cycle situations and extra storage for solar. (Second battery is not included).

The GTO/PRO 2000XLS Single Opener can be used with GTO Inc.'s complete line of accessories including keypads, transmitters, exit wands, gate locks, solar panels, and more.

• Soft Start/Soft Stop - Soft start/soft stop is a feature in which the control board, during the set up process, learns where your opening and closing points are for the swing of the gate. Then during normal operation the gate operator automatically slows the motion of the gate to smoothly meet with the gates destination point. This feature can also be turned off.
• Closing Timer - Set your gate to close between 0 and 120 seconds after reaching the full open position or turn this option off to leave it open until an entry device activates closing motion.
• Learn Mode - With the GTO/PRO 2000XLS the learning process, the end points are determined by the user via remote. A simple press of the transmitter tells the opener where to stop and when the opener is set to the desired stop points, save the settings on the board.
• Oversized Control Box Housing - The GTO/PRO 2000XLS's oversized control box can house (2) 7 amp/hour batteries and is rated for outdoor use.

• 7 A/h 12V Battery
• Control Box
• Operator arms with power cable
• Control Board

• Brackets and Hardware
• Low Voltage Transformer
• 1) Remote
• Spanish/English Manual

The following tools and supplies are suggested in the manufacturer's manual for optimal installation. They are not provided by GateCrafters, however, most tools are available at local hardware stores for purchase or rental.

• Power Drill
• Open End Wrenches - 3/8", 7/16", and 9/16"
• 3/8" Drill Bit
• Hacksaw or Heavy Duty Bolt Cutters
• Small (Flat Bladed) Screwdriver
• Phillips Screwdriver
• Tape Measure
• Level
• Wire Strippers
• C-Clamps - small, medium, and large
• Center Punch
• An extra person will be helpful

Does this apply to the other mighty mule accessories too like the F3100 MBC wireless intercom?
Yes, any 318 wireless will be able to work, you will simply have a second frequency available to use for more reliability for the 433 remotes purchased.

Is it easy to wire in? Where can I find instructions and wire to do this?
It is very easy and here are the instructions on how to do so:

What other cool features am I getting because of buying this?
Glad you asked, one of our favorite features is the fact that the 433 receiver has two channels and the remotes have multiple buttons. What this means is you can have one button open your gate and another unlock a pedestrian gate. Or buy a second receiver and have better range for your garage door too all controlled by one remote.
Or you could program one set of remotes to channel 1 that is directly wired into the mighty mule and another set of remotes that are programmed to channel 2 which you have wired into a timer (sold separately). You could then have one group of remotes work day and night and another group of remotes only access the property during business hours.

Why a 100' lead of wire, what if I want more or less?
You can order it longer through calling our number 1-800-537-4283 or cut it shorter. Most do not want to make it shorter, as the car must pass the wand in order to trigger the gate to open. If the wand is too close to the gate the car would have to slam on the brakes after passing the wand.

Is it easy to wire in? Where can I find instructions to do this?
It is very easy and here are the instructions on how to do so:

What other cool features am I getting because of buying this?
Most use this exit wand for exiting the property hands free, no remotes needed. However some people decide to use this on both side of the gate so cars can drive in and out freely without restriction. If using on the outside of the property you do want to have the wand a distance from the road or it will pick up passing traffic. The distance from the road depends on the type of traffic, 50 feet from traffic over 35 MHP, 35 feet from traffic under 35 MPH.

Also if you get this upgrade to your system you will now be able to use the Estate Swing keypad, which has an amazing 200 foot wireless range.

In general a gate lock is a great accessory to add to your driveway gate opener system. The gate opener is designed to be a device to open and close your gate. However against forced entry the gate opener is no match. If an individual intentionally and forcefully pushed on the end of the gate they could very easily overtake and damage the gate opener motor. This is because of the leverage the individual would have on the operator by pushing at the end of the gate. Also high winds could have the same effect. A gate lock physically locks the gate in the closed position with 1300 lbs of resistance. It is wired to the gate opener to automatically release when the gate opener begins to open. It only requires power when releasing so it is solar compatible and it has a key release in case of electrical failure.

Yes, 25 feet of wire pre-attached to the back of the lock.

Is it easy to wire in? Where can I find instructions to do this?
It is very easy and here are the instructions on how to do so:

Can I extend that 10' of wire?
Yes, you can have the solar panel located up to 200' away. We encourage you to move the panel to an optimal location rather than trying to make the 10' location work. You want a location that the solar panel can face south and receive full sun all day without shadows.

Is it easy to wire in? Where can I find instructions to do this?
It is very easy and here are the instructions on how to do so:

Where do I put these?
Most people place them so the safety beam is going across the driveway right past the closed position of the gate. In this case they can typically use the gate posts to mount the photo eyes on. Some people choose to use two sets of photo eyes however. One right past the closed position of the gate and another set right past the open position of the gate. This would create a safety zone - a car should break the beam when in the path of the gate from either direction. If doing this we suggest purchasing mountign posts for the second set of the photo eyes.

Is it easy to wire in? Where can I find instructions to do this?
It is very easy and here are the instructions on how to do so:

What other cool features am I getting because of buying this?
Another use for this device is as an opening device. If you would like a low cost version of an automatic exit device this can be placed on posts further down the driveway and wired so when a car breaks the beam the gate is triggered to open. Here is how to wire it for this:

Is it easy to wire in? Where can I find instructions to do this?
It is very easy and here are the instructions on how to do so:
Recommended method - for security

Alt method - for the button mounted in secure location

Another advantage of the GTO/PRO 2000XLS is the oversized control box. GTO listened attentively to the wishes of their customers and answered with their new design. Customers many times wish to use an extra battery for larger number of cycles, extra power storage for solar. The new control box design has an extra storage space built in for a second battery.

Even though this is an easy to install professional gate opener GateCrafters.com is still available for any installation or technical support the installer may need. Gate Crafters has years of experience with GTO inc. openers as well as many other brands and accessories and is readily available 7 days a week, 9am to 9pm eastern time just by calling our number: 1 800 537-4283.

GateCrafters.com is dedicated to getting the right gate opener for your gate. As more gate openers are being made economically feasible and easy to maintain, the selection is going to grow ever wider. That's where GateCrafters.com comes in. We have extensive amounts of educational material on our website to help you become an informed consumer. We also have our factory-trained representatives standing by to answer all your gate and gate opener questions and match the perfect opener with your gate. The combination of our customers' passion for home improvement and GateCrafters.com's wealth of knowledge is a perfect match and cannot be duplicated."

Below you will see customer photos of the GTO/Pro2000XLS as well as photos of the GTO/PRO 1000/1002 - this gate opener is no longer in production