The GTO/PRO 2000XLS Single Opener is designed for residential gates. This is the smallest end of the esteemed GTO/PRO line of gate openers.
- Gate Materials: Wood, Steel, Aluminum, Vinyl, Chain Link, and others.
- Weight and length: Up to 16 ft. in length or 500 lbs.
- Max degree of opening: 110 degrees
- Gate Post or Column size (pull to open ): Max 4" x 4" post or gate mounted 2" from the rear face of a column.
- Push to Open: Yes (bracket purchased separately) - setback above does not apply to push to open.
- Solar Compatible: Yes (purchased separately).
- Power: Battery and Low Voltage Trickle Charge (both included)
- Power Wire Specification: 16 gauge wire (purchased separately) with 1,000 foot max length from transformer to control board.
- Operating Temperature: -5 ºF to +160 ºF
- Warranty: 2 year manufacturer control board, 2 year component manufacturer warranty.
GTO/PRO SW2000XLS Single Swing Gate Opener
An exciting time in the world of gate openers. GTO/PRO has rereleased their PRO SW2000XLS series of gate openers as the PRO-SW2000XLS series. The XLS series has a number of improvements over its predecessor including a 10% increase in the operating speed. The XLS series also contains a new rev-counter board with reed switch technology, which helps the gate opener determine its position. In addition, the XLS series includes an improved front mount and scraper seal design. Unfortunately, the new XLS series control boards and arms are not cross compatible with the XL series. So, if you purchase an XLS arm for your XL control board, they will not work together.
The GTO/PRO 2000XLS Single Opener can be used in residential applications including automating gates made of farm tubing, steel, aluminum, wood, and chain link, along with many other gate types. This opener can be set on the left or right and is used in the standard pull-to-open operation. By adding the push-to-open bracket (347IH) (not included) the GTO/PRO 2000XLS can be used to push the gate open away from the property with the arms still mounted on the inside.
The GTO/PRO 2000XLS Single Opener is a low voltage system , eliminating the need to run expensive 110 volt AC power wire to your gate. Simply run 16-gauge low voltage 2-conductor wire to a household outlet within 1000' of the operator or use a solar panel within 200' using the same wire. With the GTO/PRO 2000XLS's oversized control box you can house (2) 7 amp/hour batteries to accommodate higher opening cycle situations and extra storage for solar. (Second battery is not included).
The GTO/PRO 2000XLS Single Opener can be used with GTO Inc.'s complete line of accessories including keypads, transmitters, exit wands, gate locks, solar panels, and more.
- Closing Timer - Set your gate to close between 3 and 120 seconds after reaching the full open position or turn this option off to leave it open until an entry device activates closing motion.
- Learn Mode - With the GTO/PRO 2000XLS the learning process, the end points are determined by the user via remote. A simple press of the transmitter tells the opener where to stop and when the opener is set to the desired stop points, save the settings on the board.
- Oversized Control Box Housing - The GTO/PRO 2000XLS's oversized control box can house (2) 7 amp/hour batteries and is rated for outdoor use.
- NEW: Rev-counter Board (with reed switch technology)
- NEW: Controller with Jog Button Technology (used in GPX series)
- 12 Volt DC/7.0 amp hour, Rechargeable Battery
|
- Control Box
- Operator Arm with Power Cable
- Control Board
- Entry Transmitter
- Mounting Hardware for Post Mount ed Installation
|
- AC Transformer
- Wire Harness
- Closed Position Stop Plate
- Gate Bracket
- (2) Post Brackets
- Post Pivot Bracket
- Spanish/English Manual
|
Estate Swing Gate Openers are specifically designed for DIY customers. Featuring easy bolt-on brackets and straightforward setback templates, Estate Swing allows any homeowner to effortlessly install and automate their gate. With just basic household tools required, no special expertise or building code approval is necessary*.
For over a decade, DIY Gate Openers has been the premier source for Estate Swing openers and accessories, offering technical and installation support seven days a week from 9 AM to 9 PM EST. Our extensive experience ensures you receive the best guidance possible. By choosing to install your gate opener system yourself, you can save thousands of dollars over its lifespan. You'll also gain valuable knowledge about your installation and its operation, making troubleshooting and routine maintenance much simpler in the future.
*Disclaimer: At this time, we do not have information regarding any necessary building code inspections for the installation of Estate Swing gate openers. Therefore, we cannot ensure that all counties will not require prior approval.
- Order specific customized accessory wiring instructions
- 360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
- Free 24/7/365 Installation Support
- Free 7 day/week Technical Support
- Largest Number of Certified Techs in America
- Free assistance to find the right gate opener for your gate
- Free systems design assistance to match the right accessories to fit your needs.
- Extremely competitive pricing
- Free shipping on all accessories purchased with a gate opener
- We stock replacement parts
- Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by DIY Gate Openers, however, most tools are available at local hardware stores for purchase or rental.
- Power Drill
- Open End Wrenches - 3/8", 7/16", and 9/16"
- 3/8" Drill Bit
- Hacksaw or Heavy Duty Bolt Cutters
- Small (Flat Bladed) Screwdriver
- Phillips Screwdriver
- Tape Measure
- Level
- Wire Strippers
- C-Clamps - Small, Medium, and Large
- Center Punch
- Additional Person for Help
Please refer to the Installation Manual for Tools Needed.
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
|
Words from Senior Application Engineer Anthony Geato | Top of Page |
"The GTO/PRO 2000XLS is the Jr. of the "Pro Line" family. It is a friend to the installer because it drops right into brackets of old pro 1,000's. The GTO/PRO 1000 was a favorite of professionals for over a decade with a dedication to dependability and quality. They have taken that reputation and asked consumers to apply that same level of loyalty to this new opener. This opener features greater leverage with its long stroke length.
Another advantage of the GTO/PRO 2000XLS is the oversized control box. GTO listened attentively to the wishes of their customers and answered with their new design. Customers many times wish to use an extra battery for larger number of cycles, extra power storage for solar. The new control box design has an extra storage space built in for a second battery.
Even though this is an easy to install professional gate opener DIY Gate Openers is still available for any installation or technical support the installer may need. DIY Gate Openers has years of experience with GTO Inc. openers as well as many other brands and accessories and is readily available 7 days a week, 9am to 9pm eastern time just by calling our number: 1(800) 537-4283.
DIY Gate Openers is dedicated to getting the right gate opener for your gate. As more gate openers are being made economically feasible and easy to maintain, the selection is going to grow ever wider. That's where DIY Gate Openers comes in. We have extensive amounts of educational material on our website to help you become an informed consumer. We also have our factory-trained representatives standing by to answer all your gate and gate opener questions and match the perfect opener with your gate. The combination of our customers' passion for home improvement and DIY Gate Openers' wealth of knowledge is a perfect match and cannot be duplicated."
In addition to offering innovative, industry-renowned products, DIY Gate Openers provides a unique website that helps customers truly visualize their security goals. With the online virtual builder, customers can design a customized home security gate system, complete with different gate materials and styles.
The customization goes further. DIY Gate Openers takes every aspect of gate opener installation into account, including distance to a power supply, distance from the house to the gate, and the number of homes secured by the system. By addressing these factors up front, the right gate opener can be matched to each customer’s needs, without trial and error. Our Discount It Yourself packages also let customers choose exactly what they need, not what someone else thinks they should have. Every gate opener design is truly tailored to the consumer’s specifications.
The website is designed with the customer’s needs first, and the service doesn’t stop there. If a customer finds the same gate opener or accessory at a lower price on an authorized dealer’s website, DIY Gate Openers will not only match it but also refund 10% of the difference. Likewise, if the standard Tech Support hours (9am - 9pm EST) don’t fit a customer’s schedule, they can simply email their planned installation time. DIY Gate Openers will then provide a direct number to reach a representative during that window.
How many other companies adjust their business hours to fit the customer? At DIY Gate Openers, the customer always comes first.
